❤Individually Addressable.Dream full color Programmable LED Strip,WS2812B led, WS2811 IC Built in 5050SMD.256 brightness display and 24-bit color display.
❤Wide compatibility. It works great with Arduino, Raspberry Pi, FastLED library, Adafruit NeoPixel Library, Rainbowduino, SP103E, SP105E, K1000C,T1000S, etc.
❤Easy installation.It comes with 3pin JST-SM connectors on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want.
❤DC 5v. Match use controller can appear colorful curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software.
❤Making led screen, led wall, advertising board, apply to hotel, KTV, bars, Outdoor advertising signs, Festivel Christmas or wedding party decoration,It has adhesive glue on the back, so you can stick it to the wall or other items conveniently as you like.
Model: WS2812B 300 pixels LED strip
Light source: 5050 LED
Led Qty: 60pcs per meter
Wave length (NM): R/650nm; G/520nm; B/460nm
IC Model: WS2811 IC built in 5050 SMD
Gray level: 256
Color: full color 24-bit
View angle: 120°
Work Voltage: DC 5V
Power: 0.3W per LED
Waterproof rate: Not waterproof IP30
FPCB board color: White
Life span: 50000hrs
You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip.
Led strip is made by 50cm FPCB, so there is a solder point each 50cm on strip. But this minor flaw has no any bad effect on the strip’s performance. In fact, most of the LED strips on the market are manufactured in half-meter lengths.
1x 16.4ft 150 pixels WS2812B led strip (Power supply and controller are not included)
16.4ft/5M WS2812B 300LEDs Pixels Built-in Individually Addressable Non-waterproof SMD 5050 RGB Dream Color LED String Strip White PCB DC 5V - B074FPKTMH